Free standing lace butterfly Nr.1 machine embroidery design

Free standing lace butterfly Nr.1 machine embroidery design by Krissta Simpson.
This design is available in 3 different sizes and SVG file for scan and cut projects!
 
8x8 Hoop(200x200) : Height: 83.9 mm / Width: 102.0 mm / Stitches: 20,609 / Colors: 4

5x7 Hoop(130x180) : Height: 83.9 mm / Width: 102.0 mm / Stitches: 20,617 / Colors: 4
 
4x4 Hoop(100x100) : Height: 75.5 mm / Width: 91.8 mm / Stitches: 18,088 / Colors: 4

 
This design good on table runners, bags, purse, dresses, cushions, aprons, etc.
It's all upon your creativity!
 
How to create 3D free standing lace:
Hoop a layer or two of water-soluble stabilizer.
If the lace will be seen from both sides when finished, fill your bobbin with matching top thread.
Stitch the design.
Once complete, remove from hoop and trim away the stabilizer from the embroidery.
Soak the design is a pan of water. I use warm-temperature water.
The stabilizer dissolves quickly.
Bolt the design, and lay flat to dry on a towel.
 
Available in the following file formats:
 
CSD,DST,EMD,EXP,HUS,JEF,JPX,PES,SHV,VIP,VP3,XXX,PCD,PCQ,PCS,PEC +SVG
Other file formats and sizes by request.
Full details and colour chart are in the attached PDF file.
 
This is a digital embroidery file, you must have an embroidery machine to use this design.
ATTENTION:
You can use my designs to stitching out and selling the final product or give away as a gift.
But you are not allowed to share, sell, give away, editing or trade the digital download by Krissta Simpson Designs ©.